Tempe Epoxy Pros
Epoxy Floor Coatings in Tempe, AZ
Epoxy floor coatings in Tempe, AZ for garages, interiors, and light commercial spaces. smooth, durable finishes. Free estimates available.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Tempe and nearby communities.
Epoxy floor coatings turn a bare, porous concrete slab into a sealed, smooth surface that resists stains, scuffs, and daily wear. A properly installed epoxy system builds 10-20 mils of film thickness, enough to bridge minor surface pitting without the imperfections showing through once it cures. Tempe Epoxy Pros applies epoxy coatings in condos, single-family interiors, and small commercial spaces across Tempe, matching the coating thickness and primer choice to the slab condition underneath.
Whether the job is a laundry room floor, a basement-free interior slab, or a small retail back room, the same core steps apply: diagnose the concrete, prep it mechanically, and build the coating in layers rather than one thick pour that can trap moisture.
What's included
What's Included With Epoxy Floor Coatings
Typically included: concrete moisture check, mechanical grinding, crack and pit patching, primer coat, pigmented epoxy base layer, protective topcoat.
Optional: metallic pigment accents, decorative color blending, anti-slip texture additive in the topcoat.
Customer prep: clear the room of furniture and stored items, and note any past water intrusion or staining so it can be addressed before coating.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Epoxy Floor Coatings Process Works
Step 1Surface Condition Check
The concrete is examined for moisture, cracks, and contamination before coating begins.
Step 2Mechanical Surface Prep
Grinding or shot blasting removes old coatings and roughens the surface for bonding.
Step 3Repair & Patch Work
Imperfections are patched to provide a level and consistent surface for coating.
Step 4Primer Coat Application
A primer layer is applied to enhance adhesion and reduce bubbling during cure.
Step 5Epoxy Layer Application
Epoxy is rolled or squeegeed across the floor to form a smooth, durable surface.
Step 6Cure & Quality Check
The finished coating is inspected for consistency once fully cured.
Materials
Materials and Methods for Epoxy Floor Coatings
Solid Color Epoxy
A pigmented epoxy provides a clean, uniform appearance for interior floors and hides minor surface variation well.
Self-Leveling Epoxy
A self-leveling formula flows into low spots on an older Tempe slab, creating a flat finish without a separate leveling pour.
Epoxy Primer Sealer
A sealer coat penetrates the concrete first, which matters on slabs that have been exposed to years of desert heat cycling.
Metallic Pigment Additive
Metallic pigments create a dynamic, marbled visual effect for showroom-style interior floors.
UV-Stable Topcoat
A topcoat resists yellowing where a room gets direct sun through windows or glass doors.
Industrial Degreaser
A degreasing agent strips oil and residue before coating so the epoxy bonds instead of lifting later.
Questions on materials?
Get a Free EstimateTimeline
How long does a an Epoxy Floor Coatings Project take?
Most interior epoxy jobs move from first visit to finished floor inside a work week, with the heaviest downtime during cure.
- 01
Consult and slab check
same day - 02
Grinding and patch repair
1 day - 03
Primer and base coat
1 day - 04
Topcoat application
1 day - 05
Cure before light foot traffic
24 hours - 06
Full cure before furniture and heavy use
3–5 days
Need a schedule that fits?
Get a Free EstimateBefore & after
Before and After Epoxy Floor Coatings Results
Before 
After
FAQs
Epoxy Floor Coatings FAQs
How much does an epoxy floor coating cost in Tempe?
Most interior epoxy jobs run a few thousand dollars depending on square footage, slab condition, and whether self-leveling or decorative pigment is added. A free on-site estimate gives an exact number.
How long before I can walk on the floor?
Light foot traffic is usually fine after 24 hours. Furniture and heavier use should wait 3-5 days for a full cure.
Can epoxy go over an old coating?
Only if the old coating is sound and properly ground first. Peeling or flaking epoxy has to be removed back to bare concrete before a new layer goes down.
Does epoxy hold up to Arizona heat?
Standard epoxy performs well indoors, but spaces with direct sun exposure benefit from a UV-stable topcoat to prevent yellowing over time.
Is epoxy slippery when wet?
A smooth epoxy finish can be slick when wet. An anti-slip additive in the topcoat is an easy fix for bathrooms, laundry rooms, or entryways.
What causes epoxy to fail early?
Skipping moisture testing or mechanical grinding before application is the most common reason coatings peel or bubble within the first year.
Epoxy Floor Coatings
Get an Epoxy Floor Coatings Estimate in Tempe
Call Tempe Epoxy Pros at +1 (928) 249-9538 for a free estimate on your epoxy floor coating project.
Questions about this?
Get a Free EstimateMore services
Other Epoxy Flooring services
Garage Floor Epoxy Coatings
Garage floor epoxy coatings in Tempe, durable finishes for condo and single-family garages, free estimates available.
Polyaspartic Floor Coatings
Polyaspartic floor coatings in Tempe, AZ with fast cure times and UV-stable finish. Garage and commercial options. Free estimates available.
Polyurea Floor Coatings
Polyurea floor coatings in Tempe, AZ for garages and commercial spaces needing flexible, fast-cure protection. Free estimates available.
Ask about Epoxy Floor Coatings
Tell us about the project and how to reach you.